Best Eco Friendly Resin Epoxy Food Safe

👤I was impressed with how easy it was to use this first time I bought it. I did not have a bench mark for other resins. I had to line the tops with plastic wrap and screw on the lid to get a tight fit because the poorly made lids never screwed on tightly again after the first use. I didn't have a lot of air bubbles, it was easy to mix, and I had a long working time. I had issues with craters and the resin wouldn't fall evenly over the edges. I thought it was just my inexperience. The project should be cleaned properly first. It was all due to user error. There is a I decided to try a competitor brand on my second purchase. My issues were not caused by a user error. I have perfectly waterfall edges and no blank spots. I think that this would work well for projects that have borders. I don't think anyone would complain about that. Pick another project if you are working with tiles or canvases. It was edited. Wow. The Dr. Crafty Resin company is a customer service oriented company. After being contacted about my review, they generously offered compensation. I'm very impressed! Since I'm considering trying my hand at some coasters made from the same type of material, I think this will be my preferred brand. Thanks for being a great company!

👤There is one star across the board. This is a huge waste of money. I can't sell pieces that don't cure, it's tacky and bendy, and it doesn't cure properly. I know how to use it. I mix well, I measure well, and still I feel like I throw pieces down the drain. I waste more than I use, and when I screw pieces in, it splits open. I am very unhappy with this price. I will stick with my brand.

👤I was excited to use the hardner when I got it. I tried it. I've been using it to try a lot of things. I was completely disappointed to see that the price of the hardner went up by $10 when I went to buy it again. Why? I really like your hardener, but at these prices, I might have to try something different.

👤I wish I had read the reviews before buying. I had the same issues as others, but it wasn't curing. I have made every piece not fully hardened. I cannot sell bendy pieces that result from them. Total waste of money. I have tried many different methods and nothing has worked. It's really sad.

👤I have been pleased with the product. I used it in a kitchen table I was building. This is a good cure for beginners because of its long work time. There is a The key is level workspace. I learned a few things along the way, such as placing your containers in a warm water bath. Before pouring, dry off containers. This helps the mix with fewer bubbles. As you mix, stir slowly and make a mess. Use a heat gun to remove bubbles. You can use a lighter to pop bubbles. Continue to check it until you don't see any more bubbles. Remember to be patient, this isn't a microwave dinner. If anyone at Dr. Crafty has a suggestion, I am all ears. Some voids may be visible after we poured some extra into the molds. The air bubbles are not being removed correctly. We were just playing and not paying attention. There is a I will be happy to use this product again in the future. Good quality at a good price.

👤Listen... Read it. After searching for a decent quality of resin, I bought this one. I was scared since I had read that there were other alternatives that were better for them and that this one was not a good buy. The box had no tape, but the items inside were fine and nothing had spilled. They should be more careful with the packaging. I am a beginner at the craft of resin crafts. This is a very strong resin. It may have a few bubbles after mixing, but they should go away with a heat gun. There is a If you are going to get any other type of material. Make sure you mix them. And well. The only reason people used this one was because they failed in the process of mixing. You can't mix this fast and have different ratios. You can watch videos on how to measure liquids. You can mix the right amount with your eyes being the same level as the cups. You have to do everything slowly. You have to be patient. For some projects, it may take more than 72 hours for it to completely harden but that is okay because you are not going to buy this with the expectation of doing all of your projects quickly, only people who didn't read this review do that. You can follow instructions and do things correctly if you read this review. There is a Don't be afraid of failure. Failure leads to success if you keep working hard. There is a Good luck with your projects!

👤I've been crafting for about 6 months or so, I use an amazing clear cast, but I've been using this one for a while, it's great at dispersal of micro bubbles, not too thick, very low odor, and comes with plenty of utensils to get you

👤My kids are going to try some crafts because of quarantining and Tiktok. The kit has everything they need to start. There is a Silicone mat, a couple dozen pipettes, big stirring spoons, Silicone spatula, sandpaper, tweezers, 3 different Silicone measuring cups, nitrile gloves, pouring spouts, and 16 ounces of hardener. Well... That is a long list. If you went to your local hobby/craft store, you'd pay more than triple what this kit costs for all the goodies. There is a Everything was perfect in the box. If you're going to try this craft out, start with this: it has everything you could possibly need and then some. You will still have stuff left after youTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkia There is a We're waiting for our molds to arrive and then we'll be making our hearts out of them.

👤This was the first time I worked with it. This was very easy to work with. A small amount goes a long way.

👤The kit is great for beginners. Silicone cups, spatulas, gloves, and more were included. There is a It was great because most kits come with plastic measuring cups which are a hassle to clean out. The clean up is easier with the silicone cups. I don't use the cups that came with the kit. The item was well packaged and arrived quickly. This kit is very good.

👤I only use total boat for my pours and have never had a problem with it. The company that sells this brand is selling out of date products. The yellow tent is old. Its shelf life is over. I am stuck with a resin I can't use and out of pocket because the company doesn't return or exchanges it. I don't think it's right that they don't offer to replace the item or if it was damaged in shipment. This company is selling 2 1qt, not the same size as the total boat. The manufacturer's goals and sizes. There are 2 1/2gals. I posted a picture of the difference in size. Save money and order from the total boat.

👤We cast a few things with this. I've included a few of them. I expected it to take a while, but it cures quicker than I expected. It has taken all the colors that we've used. I would highly recommend the use of a pressure pot for anything other than flat pours. We were unable to get out of a couple of the castings because of the small bubbles. The bubbles were small enough that they wouldn't be noticed unless you were looking for them. There are also pumps suggested. It's easy to pour more than you need when trying to get an exact measurement because the part A is thick. We have molds that will pour the extra into it. Not everyone has that option. The best that we've used was not the best. We would order it again for the price.

👤April 2019. I poured this over the formica bathroom counter after measuring the parts. I made a ring after setting a cup of coffee on it. It wasn't completely set up until about 4 days after the pour. We did the pour after we painted it. There is a I mixed the rest of the epoxy after painting the shower pan. Not good. The volume in each container was not the same as I had been told. The shower was tacky. What to do? I contacted a company rep through Facebook and he was sympathetic, but basically said "Too bad." I decided to contact the company again after I thought I'd have to tear out the entire shower. I got their expert this time. He said to mix it up and then paint it. Viola! It worked. It wouldn't show anything except a shiny pour, so I couldn't take pics.

👤I bought this in a pinch because the normal brand I used was unavailable. It worked well. It does not flow or level as well as other products. I used half of the product as a seal coat because it wouldn't flow after my first pour. The surface was poured at a temperature of 70 F. It was still a pain to get the flood coat to flow even after I pre heated both parts of the epoxy and mixed it up twice as much as I needed. The product is nice once it is set, but requires more prep work and attention during the pour than other products.

👤This is not a typical epoxy I use. It was more budget friendly than some brands. It mixes very easily. I used this in one of my builds to make three spalted beechwood shelves with a blue tinted river running down the center. The pictures I listed with it showed it to be stunning. It is easy to clean up. I use a glass container and wipe out the container with lysol cleaning wipes which break down the epoxy easily. It doesn't have anything at all. It arrived safely and was shipped quickly. There are foil seals under the caps. Depending on the heat and humidity, it cured in a half a day. Due to heat, the pour is no thicker than 1:4. I was able to pour 1/2” without an issue in my house. The bubbles were easily popped with a torch. You could use a lighter. If you want to save money, give this a try. It worked just as well as the more expensive brands and is just as easy to use.

👤If you want fine epoxy for your project, you're in the right place. Please read the review carefully. There is a I'm not being paid or getting any free staff for this review. 1. Read the instructions carefully. The temperature is the number one for a good final outcome. 75 degrees is ideal for this and you should take your time to make sure your room is warm. If you want to make sure, use a thermometer. I warmed it in the microwave. I think it worked well. A) The thickness of layer MAX is 1/6 of an inch. Waves and craters from rising bubbles will be created by anything thicker than that. Don't use any chemicals near your project while it's drying. I was coating my car with ceramic paint coating and mist got into my house from outside. At that time, it was drying. The smooth surface of epoxy was destroyed by the mist of that chemical.

👤I was pleasantly surprised by the experience I had as a first-time user. It arrived much quicker than I had anticipated. It arrived on the Friday before, and was supposed to arrive on Monday. The instructions for mixing it were clear. When I poured it on the table, most of the bubbles were gone. It was easy to spread with the help of a plastic spatula. I tried to use a heat gun to work out the remaining air bubbles, but it wasn't necessary because the room was warm. It may have made my experience more complicated than it should have been. I did better when I stopped using heat. The product is great, the service is fast, and it's easy to use. There is an update. I have finished the table that I was working on. I decided to add one more coat and it was even more impressive. The table tops are very smooth. When the light hits them, they shine. The edges took a little more work, but I think it looks amazing. I got this table from my mom's house after she passed away and it was nothing special. I loved the table. My kids will one day take to their own homes, and I feel that I made her table a true keepsake by taking it. There are no flaws in the final coat. The ones that are there were either put there by me or painted by my mom.

👤This was the first time I tried this particular type of material. I have been using the substance for a long time. I have tried many different epoxies. This one was quick and it was attractive to me. Sometimes I run out of time and need my stuff to dry quickly. It did what it was advertised to do. I was worried since I wouldn't have much time to work. This is what surprised me the most. I had the same amount of time as all the other epoxies. The other surprise was how clear this was. I'm going to be playing with my molds tonight so we'll see if this is true but I'm sure it's going to be great. There is a It did have a little odor, but it was not as bad as the majority of the others. It didn't make me feel bad. I'll tell you how it did in my jewelry molds later.

👤I was very impressed with this material. The quantity is awesome and it dries rock hard, unlike some of the store brand resins that are soft enough to be damaged. It cures very clear and without bubbles. This specific resin cures in 8 hours. This is the fastest 2 part resin I have ever seen and it's different from any other one on the market right now. Even though the cure time is so short, the work time is not much shorter than average. I highly recommend this product.

👤The best we've tried so far is the resin, my daughter and I are still new to this hobby. There is a strong musty/moldy odor in the one from Hobby Lobby. We don't use any special procedures for removing bubbles, and I still find very few in the items we've made so far. The finished product is hard, clear and sets in about 8 hours if the mix ratio is correct. Silicone molds for a solid cube, sphere, pyramid, and gem shape that require a pour around 3 to 4 inches deep and set solid in 8 hours were purchased recently. We live in an area of high humidity, and items have been left out in the dark, on the top shelf of a dark closet, and near a window on nights when the temperature is around 75 degrees. There is a The flat items like notebook covers and coasters should be left to lay flat for about 24 hours after being removed from the mold, because they may warp if used with powder pigment. 10/10 will purchase again. It's easy to use and it's clear.

👤I thought I knew what I was doing when I was a first timer. I failed. I like your product. It worked well for me. I didn't know how to add glitter to the mold, so it sat on the bottom. I think that's correct. The product dried quicker than I thought. I made a bracelet for my 2 year old. It was cured within 12 hours. I taped it where my baby girl would fit. Allow it to cure for the rest of the night. She was happy with it when she wore it this morning. Will purchase more later. Thank you so much. From Hawaii State.

👤I used this stuff to protect glass paint. I cured the Mod Podge for 28 days and then put it in the dishwasher. It was not perfect. The areas where the MP was thin turned out to be bullet-proof, but where I painted it thick? It re-absorbed the water and turned it white again, so it wasn't cured enough. See the first photo. If you paint it thick, use extra drying time. 28 days may not be enough. There is a I washed a test glass after letting the glasses sit for another 28 days. The thick areas got worse, but it wasn't as bad as before. I told them to put the glasses in the oven to cure them. The "Decoupage Queen" does it at 350 degrees for 30 minutes, but you have to put the glasses in the oven before turning it on and then let the oven cool completely. I put the glasses in the dishwasher. The Mod Podge was dry and clear. See the second photo. You can heat cure stuff in certain circumstances. If I had coated paper on the glassware, the oven would have destroyed it. Before heat curing, I let the glasses dry. I don't know if it will work for your project, but the best thing you can do is to make a test item that you can bake so you don't risk your main item.

👤I bought it for painting on ceramic mugs. The mugs were cured in the oven at 175 for an hour. The mugs were heated in the oven. Several times, mugs were run through the dishwasher.

👤The glue was all over the prime box.

👤The wine glass was made with Mod Podge. It's easy to work with water. The glass is in great shape despite only hand washing it.

👤It is a small jar and is a lot cheaper than buying from a hobby store. It was covered well. It worked well to a pretty sheen. There is a photo of the underneath side of the plate. The finished product is the other photo.

👤I am a mod podge user. I'm not sure how to resolve this streaky problem. I wanted to use it to make coaster's, but can't. It seems more streaky than the regular mod podge.

👤The product did not work, and after use in the dishwasher, it hardened and peeled off. I was surprised at the number of positive reviews. This product does not work as advertised and does not do its main function of being dishwasher safe. The pattern was destroyed by the dishwasher.

👤It doesn't dry clear on glass. The glass is foggy and streaky.

👤I didn't say in my video that this is toxic, I think it's important, so can be used for a lot of things. There is a The product is not like normal upv glue, but it is. I only knocked one star because of the month wait. It is a long time if you are impatient like me. When I have figured out the best way to use the product, I will keep buying it. There is a There is an update. This stuff is amazing. It will be a regular purchase for me. I have been using one of my glasses for a long time and the mod podge has not cracked or peeled off. I don't have a dish washer so I have washed myself by hand.

👤If at all possible, here are some ideas to follow in your project, having worked with different kinds of epoxy before. I wanted the result to be a "pour" so that the parts were encased in a solid substance. Ignore the little mixing area and get some small cups from the dollar store. Score the 2 parts you are binding if you can. What does that mean? Use a sharp nail file, hard sand paper, and deep cuts like "x" to scratch the two sides. This is a very important step for the bond to grip and should not be skipped. The air bubbles should float to the top when you leave the dispensers upright. I like to use hard clear plastic knives when stirring. You can estimate where to stop with a magic marker line. There are two cups and two straws ready. Plug and push down on both sides to fill the cup, then pull the plunger back up to dry the ends. Don't bother if you are using the whole thing. Stir quickly to 15. The secret is to pour the contents in the second cup, and then stir another 15 seconds using a second clean ring. "Why bother?" is a question you may ask. This is a known technique and it gets rid of mixing problems and creates a rock hard result. I used the second stirring, but you could also use the wooden stick provided. It's reasonable to pour the contents on to an object, but be aware that tiny bubbles do exist using this epoxy, it sets too fast for a perfect clear look. The final item to consider is temperature. If you want a 24 hour hard cure result, you should put your project somewhere warm that's between 75 and 85 degrees. A well known trick is to put an electric heating pad in a box under some rags. Place your project in a box and cover it up. The box was monitored using a kitchen temperature. If you follow all of the steps, you will get a rock hard plastic like result in the end, and I recommend this product!

👤I was devastated after tipping over my tobacco water pipe, but this epoxy has worked wonders. The ceramic/glass bond is very strong. Highly recommended.

👤Before using this product on an object of interest, newcomers need to practice mixing the epoxy and applying it to something to test the bond strength. The amount of time mixing is needed to reach consistency. The bond will be rubbery if not. The bond will be very strong when mixed properly, but will need a few extra days to cure and become even stronger. It is a good product with a good amount of volume. I used it to fix a pair of headphones.

👤I was looking for an alternative to soldering or torch welding in order to bind copper pipe for non-potable purposes and figured I would give this a try. I don't think this is safe on the pipe used for water. I've had positive experiences with Gorilla brand products in the past. There is a The instructions state to mix the two together for 20 seconds and then use within 5 minutes as it will be the most effective prior to that. The plastic insert packaging can be used as a mixer palate. There is a black plastic tab that is supposed to be used to close the apparatus. The stuff was non-usable before the 5 minutes. I think that this figure is infeluenced by the environment. Since it's not a monsoon season in Arizona, the humidity is very low. Paint dries incredibly quickly. I had to work fast in order to beat the drying time. I didn't work on my project for a few days. I tried to pry it apart, but couldn't. Everything seems to be bonding permanently. There is a It works on copper pipe tubing. It's messy and dries quickly in a hot climate.

👤I was making a mosaic table and bought this to use. I discovered a couple of things using it. It is difficult to remove uncured epoxy from a wooden surface. 2. I am allergic to uncured epoxy. 3. Follow the instructions. There is a The cure would have been very good. If I followed the instructions, I wouldn't have skin peeling off my fingers. I would have had a beautiful table to share. There is a The bottom line. This is a great product. I will be happy to use it again on a different project. After reading the instructions.

👤My coasters came out great after my first attempt at casting. I was able to make 2 sets of 5 coasters. Set after 24 hours without torching. I used mixed colors.

👤The mix was easy and I would use it when using this epoxy. I recently started doing crafts with this clear substance. I am still learning how to make bubbles in coasters, but I can see bubbles in the picture. The pictures show that once the epoxy dried, it came out completely clear. You can see the detail and color of the flowers. I had to leave the mold overnight to completely dry. It was very easy to pour this mixture. I was able to remove the bubbles with a flame lighter. I couldn't see those under the flowers, but I did miss some. This kit is perfect for beginners like me. After this craft, there are still some left overs.

👤This stuff cures quickly and is bubble free. It's great when you're new and impatient to see your work and make more, I'm able to demold pieces after 6 hours. Doesn't get hot and doesn't let off fumes. Put it in some hot water for 10 minutes, pour equal parts into a mixing cup, and keep stirring in one direction until it's crystal clear. I poured room temp and the bubbles still rose to the top, but they vanished when it was cured. It's easier to work with when it's warm. There is no need for a pressure pot. It's a good thing. Such a good brand.

👤I bought this for my daughter so she could make something. This stuff was very beginner friendly and easy to learn with, we didn't have any experience with it. If we blow them out with a heat gun, we didn't get many bubbles. You can buy a bigger quantity with a different brand, but it doesn't work as well as it could, so we haven't wanted to try anything else. There is a She is selling her crafts and making money for a teen who has been in a hospital.

👤I bought this to explore my talent. I'm experimenting with ashtrays, keychains, rolling trays and tumblers. It was fun and satisfying to make it. I am very happy with my purchase. I highly recommend.

👤I used this to make jewelry. They all came out strong. There is a If you are new to the material, my suggestion is to make sure you measure each portion evenly and acturately. It should be mixed well. It is important to be patient. As they dry, keep your items level. Use a heat gun and toothpicks to remove bubbles. Be imaginative! There's more than one thing you can put into the material.

👤I think a 1 star is correct. It was mixed and hardened. Not what I expected after that. It says it's UV protected. No way! There is nothing about how thick it needs to be. I got this to make an outdoor table top that is UV protected. I expected it to be used outside. I used a mechanical mixer to mix it. It hardened. It was nice and clear. I needed to finish the edging. I put it outside. That is when it turned yellow. It looks terrible. I was told by the company that it was because of being outside and more than 1/2 inch thick. There is a Thanks a lot for ruining my project. The description doesn't say anything about this. If it does now, it's because they changed it. This is bad for anything that will be outside.

👤I was pouring a multi-layer pour that was 2 inches deep. This was done to allow curing between layers. The first picture shows the results after 2 pours. The deepest part of the 3rd pour was a surface pour. The pour was completely clear and beautiful after about 3 hours, as I worked to remove all the bubbles that rose to the surface. The entire thickness was full of micro bubbles when I checked the pour several hours later. These are trapped inside. The 3rd pour came from bottles that were ordered at different times. I called Pro Marine. I thought I would get some answers when they asked for details and photos. I received an email saying that I need to direct you to contact Amazon because they fulfilled the order. I would give them the same information so they can help you. I don't know which hub it was sent from or if there is an issue. There is a So! The order was fulfilled. The ProMarine Supply Co. is a marine supply company. They washed their hands after dumping the issue on Amazon. So disappointed. If you want someone to stand behind their product, stay away. I have to redo this mess with a product that will work.

👤There are tons of bubbles. It was necessary to place the hardener and resin in warm water for a few minutes and then work in a warm room. 45 minutes isn't enough to work with but more than 20. You need to be prepared with all your colors. I will try again after my coasters came out well. Not impressed with the amount of bubbles but using a heat gun as you work helps a bit. They should be able to catch a few that came to the top before it gets too hard. The price is great, but it's not clear why. There is a I got very hard very fast. There are tons of bubbles even when gently stirred. I pour the extra into a mold and then use it to make a set of coasters, but it was thick by the time I finished pouring them. If you don't have exact measurements, you will end up wasting the product. I keep some extra clear in case I need it to finish my coasters, but I can't do that with this one. Not happy with this one. Won't be buying again. I bought it because it was cheaper, but I will be wasting it because it is so fast. Also got hot. My other one was not as warm. Waiting for it to cool down before trashing the cups. They are still hot 40 minutes later. The coasters are supposed to be decent. I will have to cover the ripple tomorrow when I attempt to pop some bubbles on one of the coasters. I said it already, but I had so many bubbles. It is too late to pop them.

👤It seems that mixing batches less than 40 liters has a lot of bubbles, but if you put the cup in the hot water for 5 minutes, it will clear it up. Many bubbles don't seem to come from mixing batches larger than 40 liters. Small batches give me almost an hour of work time before it starts to solidify. After a couple hours of use, it had a low to no odor, but did get a few headaches. I used proper safety equipment like a painter's mask. Proper safety equipment should be used.

👤Don't buy! I have been making cupcakes for a while. A change is due to SMELL. This product is very frightening. While applying the product, it will oxidize. After putting on the form. If you apply any heat, it will cause a problem. I decided to give it another chance after it ruined 3 of my projects. It's frightening. As I finally got it all figured out, I went to bed. To wake up with a burst of blisters and spasm. They can take it back. I would like a refund and wish I could keep all my other stuff. I have to give it one star.

👤I wanted to try it after seeing lots of TikTok. You have to mix the same amount of bottles, pour it into a mold and let it dry. There is a I was pleasantly surprised by them since it is completely transparent and I can use it as I please. There is a If you are a beginner and like to make things yourself, you should definitely try this set because the quality is very good, and the final project does not produce bubbles, as long as the process is used according to the instructions, the result is amazing.

👤It was very easy to use. When I mixed it, it did not form a lot of bubbles. The bubbles were gone. The only thing I can say is that this is a low-viscosity resin, so things can fall or sink within it. If you want to do floral patterns or use it for other purposes, I would recommend letting it sit for a while. This is great for dirty pour designs for agate crystals.

👤This is very thick. It's easier to measure out than it was before. I used to have issues with the Allumilite partially curing. I haven't had an issue with it.

👤The effect of the video is very good, mixing and drying is very easy, the finished product does not smell bad, and the important thing is that the product does not smell bad. It is a very good experience and I will continue to do it. The product is very good for beginners and the cover is very good, definitely will order again.

👤The shiny clear liquid of this epoxy is very easy to dry. It is easy to pour. I am making a bowl with wood and a substance to fill in the cracks. I filled them with gold foil and cured them. It was very easy. When doing projects with epoxy, please wear a mask and gloves.

👤Excellent product, definitely buy more that you need, taping off borders is no joke! Thank goodness I put the cardboard on the floor because I thought we had taped off the bathroom counter. The countertop was painted black first, then pieces of crushed glass and glitter were added. It took two long pours. It looks like black quartz at a fraction of the cost. Even though it is exposed to a lot of water, there has been no scratching or dullness on the surface. The mess is worth it if you love to do projects and save money.

👤It was perfect! It was great to follow the instructions. The project I was working on was amazing.

👤I had to leave a bad review for this one. First, it didn't come with gloves. The second false advertisement. It says it will take at least 10 but for smaller projects like jewelry it will take even longer. The cure time is 24-48 hours. What is the point of getting a fast cure? Value isn't good either. The brand I used before this came with 32 ounces. There are 3 smaller measuring cups and 2 decent sized sticks in this kit. Same curing time and price. I wish I could come back. Please save yourself the hassle. There is a There is an update. Didn't cure all the way. It did not cure in Time because of a rushed order. It was still moving even after being left for 12 hours. I made sure the measurment was correct. It was horrible.

👤This was my first time working with a substance. I poured the combo in the mold, followed instructions and was very happy with the result. This product is very good and I would highly recommend it.

👤The quality of this epoxy is amazing. I am new to crafting with this type of product and this will be the only product I use from now on. Thanks for the results! My glasses are coming out.

👤This product is amazing. I was working with Crystal Clear and it had a smell. There is no smell coming out of the bedroom I work in. This is perfect because I'm sensitive to synthetic smells. There is a Drys with no tacky finish are rock hard. You can work faster if you are able to evaporate within an 8-hour window. I had to wait before you finished the product. Pieces are shining and not requiring buffing. There was nothing sticking to my mold. There is a I was happy to find this product. Excited to know that gallon sizes will be available soon. Making my life simpler. I would recommend buying the 32 ounce until you can get the gallon size. There is no need to test on the 16 ounces. It will be worth your time and money. I used the 16oz up in 2 days and am waiting for more. Either go big or go home.

👤It's easy to work with because of the everything it comes with. It doesn't get sticky at all once cured, and is very easy to make with little to no bubbles. Would definitely order again.